Page 1 of 1

total upgrade but need info please guys

Posted: Sun Apr 18, 2010 6:46 pm
by l3ogroll
right guys i'm doing a full audio up grade and need some info

firstly the install

JVC head unit
connects 2 CTSRN005 with can bus for 2005 onwards
2 x 12" 1200watt subs RMS power : 300 watts
mono block 4 ohm mono : 2 x 250 watts RMS
4 13" door speakers rms 150w componants
(dont talk to me about the pioneers as i think there kak @ 35w rms and not worth the money, ok for standard upgrade but i'm going bigger than that)
4 channel amp running 4 x 100w @ 4 ohm
custom boot build

audio starts going in on tue afternoon its booked in to be fitted with 4 gauge

but i would like to know if anyone is up on the wiring if the existing speaker wires will will be ok if i push 100w though them saves me running new lines to each of the doors

thanks jay

Re: total upgrade but need info please guys

Posted: Sun Apr 18, 2010 8:32 pm
by steve-t
Its a RENAULT built to a price all electrical components are the bare minimum required to do the job
Mind it's the same with all manufacturers why use 3 bolts if 2 will do ect
If your serious about the sound will need to dynomat or simillar all panels and use the best components your can afford
Why ruin it to save a few £££
Steve
ps will be limited by speeker size without cutting and resulting soaking

Re: total upgrade but need info please guys

Posted: Mon Apr 19, 2010 10:31 am
by l3ogroll
yeah its all being dynomatted when it goes for the custom boot i got a good price