Remove a couple of self tapping screws from under the inner wing area and a couple of pop head retaining clips.
(just the front half of the black plastic guarding is ok).


Then remove both the plastic corner shrouds across the front engine bay area.
Simply turn the screws & pop out with a screwdriver.

Remove the long plastic shroud across the front in the same way.


Underneath the engine remove the retaining screws, 4 of them, I think (10mm)


You can then prise the front grill / bumper from the headlights & front panel. Take your time, it does come apart.


You are now ready to unbolt the three screws securing the headlights in their retaining mount.

The headlight will slide forwards & give access to the wiring clip. Using a screwdriver pull the red clip downwards and remove the connector.

You now have the front of the car in pieces and the headlight bulbs & indicator accessible to change.