How to: Replace the 'throttle style' internal handbrake

FAQ and Tips and tricks relating to various problems.

Moderators: q292u, Ray, AndyAdmin, Stranger

__spc__
Learner Driver
Posts: 76
Joined: Mon Jul 30, 2007 6:58 pm
Location: Bridgend, UK

Re: How to: Replace the 'throttle style' internal handbrake

Postby __spc__ » Sat Nov 12, 2011 12:56 pm

Replacement handbrake assembly fitted in about an hour. Job done - this walkthrough is PERFECT!
5dr 1.6VVT Hatch, Pearl Black Megane Dynamique + Comfort Pack, '53 plate

davelowe
Driving Legend
Posts: 3136
Joined: Thu May 10, 2007 3:40 pm

Re: How to: Replace the 'throttle style' internal handbrake

Postby davelowe » Sat Nov 12, 2011 10:42 pm

Glad you liked it!
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)

Red 03 plate 5dr 1.9 Dynamique dci120

Best advice for Megane owners: sell it before it bankrupts you!

kevinwarden
Posts: 1
Joined: Thu Mar 08, 2012 1:48 pm
Currently Drives:: 405

Re: How to: Replace the 'throttle style' internal handbrake

Postby kevinwarden » Fri Mar 09, 2012 10:59 am

I am about to buy one of these cars with the handbrake button stuck in. Silly question but do any other handbrake levers from other cars fit with a bit of modification? I don't care what it looks like!

MonkeyKnifeFight
Posts: 1
Joined: Fri Jun 22, 2012 1:48 pm
Currently Drives:: Clio 200

Re: How to: Replace the 'throttle style' internal handbrake

Postby MonkeyKnifeFight » Fri Jun 22, 2012 3:35 pm

Good guide, gave me enough info/confidence to tear the GF's car apart :) i bagged me a whole assembly for 35 quid which sounds like a right bargain to be honest. Im going to fix the old one and pass it on, might even get out of this up on pennies :)

davelowe
Driving Legend
Posts: 3136
Joined: Thu May 10, 2007 3:40 pm

Re: How to: Replace the 'throttle style' internal handbrake

Postby davelowe » Fri Jun 22, 2012 10:33 pm

Excellent!
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)

Red 03 plate 5dr 1.9 Dynamique dci120

Best advice for Megane owners: sell it before it bankrupts you!

myksterx
Posts: 13
Joined: Mon Dec 08, 2008 8:51 pm
Currently Drives:: 1.4 oasis limited edition megane

Re: How to: Replace the 'throttle style' internal handbrake

Postby myksterx » Mon Sep 10, 2012 8:19 am

Would like to give a big thank you to the OP, i have successfully replaced handbrake in around 1 hour.
No need to remove gear gaitor, there is enuf room to lift up the whole console, i rested it on passenger seat and it held it up out of the way for me, thanks buddy !!

davelowe
Driving Legend
Posts: 3136
Joined: Thu May 10, 2007 3:40 pm

Re: How to: Replace the 'throttle style' internal handbrake

Postby davelowe » Mon Sep 10, 2012 10:15 pm

It's always easy the second time around.
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)

Red 03 plate 5dr 1.9 Dynamique dci120

Best advice for Megane owners: sell it before it bankrupts you!

warthog
Posts: 18
Joined: Fri Jul 10, 2009 6:30 am
Currently Drives:: 2003 Megane 2
Location: Slovenia

Different length cables?

Postby warthog » Wed Nov 21, 2012 11:22 am

Hi!

I just removed the center console and noticed that the reason why my brake is not working is that the cables are different lengths and they part that holds the cables slipped off. HOw can I fix these lengths? Can I fix this? Thank you!!!!

Ste2425
Posts: 7
Joined: Fri Dec 28, 2012 2:24 pm

Re: How to: Replace the 'throttle style' internal handbrake

Postby Ste2425 » Fri Dec 28, 2012 2:31 pm

Thank you very much my handbrake stopped working, would go the way up and still have no effect so his was perfect to see if the cables had snapped. To the lad posting before me mine is the same. One cable longer hen the other which I'm assuming is why one of my cables fell of the adjuster and thus no handbrake. I'm assuming the longer cable has stretched. Unless there's more adjusters hidden under the car. Either way my handbrake works to a degree so thanks :)

warthog
Posts: 18
Joined: Fri Jul 10, 2009 6:30 am
Currently Drives:: 2003 Megane 2
Location: Slovenia

Re: How to: Replace the 'throttle style' internal handbrake

Postby warthog » Fri Dec 28, 2012 2:45 pm

Anyone have any thoughts about the 2 different length cables? Is there an adjustment somewhere?

Thanks


Return to “FAQ / Tips & Tricks”

Who is online

Users browsing this forum: No registered users and 1 guest