The Mégane II Owners' Club

Oh yes and the brake lights could be the switch on the linkage in the passenger footwell its French after all easyer acsess to take out glove box also to get to blower motor.

Alan

Welcome to the weird world of Renault electrics, I did the same bought a 05 1.5 dci est just to take the dogs out or do a dump run, like yours it was v cheap. Sometimes everything works ok usually in a dry spell temp 15 to 20 deg is ideal, colder or hotter anything can happen, no lights at all on da...

Have you tried pumping the priming bulb while someone turns over the engine.

Hi does anyone know if the rear springs are the same on an estate as a hatch, 54 plate 1.5 dci

HI the wires on my egr valve have been chafed through, any one know how the 6 wire plug comes apart so that i can re fit the wires or failing that the part No of a new plug or if I can get a second hand one with about 3" of wire with it.


TIA Alan

The gauge on my 54plate 1.5 dci is all over the place like most of the electrics, really spoils a potentially good car, I just fill to brim then 600 mls do the same again, don,t need the gauge.

Seems a bit suspect that all four are duff, a small air leak will let the fuel run back to the tank and make starting difficult, try new leak off pipes and check all other accessible joints, even the priming bulb as the non return valve in them can be faulty.

Alam

Try disconnecting the plug to the maf, see my other post.

Alan

My Daughters 2008 1.9 dci 130 has been playing up recently, flashed up dreaded "check injection" but ran ok for about 6 weeks then went into limp mode but no eml light, I tested the glowplugs 3 duff so replaced full set " check injection " gone but still in limp mode, borrowed ma...

Thanks Joe, I replaced the glow plugs about a month ago, so will now check the regulator, also my fan blower has now stopped working, sh1t Renault electrics spoil good cars, I wonder if the more modern ones are as bad!

Hi my daughter has a 08 megane 1.9 dci I think its the 130hp version , just recently its flashed up the dreaded check injection and spanner symbol also gone into limp mode, I removed the brake switch , cleaned it and think buggered it up so new one on order, I borrowed a mates old code reader and th...

Or as I found out when you have a leak on a by pass pipe and the fuel runs back to the tank you have to manually prime the system, unlike some that have a lift pump in the tank.

My 54 plate 1.5 dci was doing just the same I thought it may be moisture in the under bonnet fuse box, decided to stick a new batt in as had just bought one for daughters car (another story there) now seems to work fine didn't need to get into fuse box, and make sure both clamps are tight.

My 1.5 dci 80 has a priming bulb under the bonnet, does this mean it dose not have a lift pump in the tank.

Tia Alan

Thanks scoop but it was something else, found a link in another post but you have to trawl through a lot of numbers