anybody know if the non vnt turbo cars have the same ecu as the vnt cars? ie put the kp39 vnt turbo on in place of the kp35 turbo and get it fully working?
cheers
craig
Search found 108 matches
- Thu May 01, 2014 6:23 pm
- Forum: Modifications
- Topic: VNT turbo onto non VNT car?
- Replies: 2
- Views: 2599
- Wed Apr 23, 2014 10:42 pm
- Forum: Modifications
- Topic: New front end!
- Replies: 38
- Views: 31910
Re: New front end!
So, been made redundant so got a bit of time on my hands! Managed to pick up a tuning box for 40quid, tuv approved and shes working lovely! The car has always felt very restricted so thought sod it and took the cat or should i say the dpf off! Cut a hole in the side, smashed it out n welded it back ...
- Sun Apr 13, 2014 9:39 pm
- Forum: Modifications
- Topic: New front end!
- Replies: 38
- Views: 31910
Re: New front end!
Nothing much has happend on this lately! Replaced rear axle bushes as it felt loose and was scrubbing the tyres off in a couple of months! So replaced them, new tyres fitted and found out the car has had a knock on the drivers rear and had a replacement axle fitted at some point, but not fitted very...
- Mon Mar 31, 2014 8:05 pm
- Forum: ICE
- Topic: speakers change
- Replies: 1
- Views: 2462
Re: speakers change
Yes, just pull the covers/grilles off to reveal the screws
- Mon Dec 09, 2013 12:21 pm
- Forum: Modifications
- Topic: 2.0 dci into 1.5dci
- Replies: 1
- Views: 2142
2.0 dci into 1.5dci
Anyone know if its possible and how to go about gettin the 2.0 dci into my 1.5 dci?
Im guessin itl be engine box ecu n engine bay wiring loom, but what about fuel lines? Is it possible to do?
Cheers
Craig
Im guessin itl be engine box ecu n engine bay wiring loom, but what about fuel lines? Is it possible to do?
Cheers
Craig
- Mon Dec 02, 2013 4:25 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
Would be a bit of a treck but its all at my old mans near wakefield
- Sun Dec 01, 2013 10:08 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
Yeah course dude, just as long as they come back!
Where abouts are you?
Where abouts are you?
- Sat Nov 30, 2013 10:25 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
Correct, thats why i went from 17s to 18s, but the hole point of fitting the porsche wheels n goin low profile and low suspension is to get it scraping its belly, thats the hole point of it! If i wanted ground clearance id have got a 4x4 or left it standard
- Fri Nov 29, 2013 9:01 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
I dont have specifics unfortunately cos i took mine off to be done. Iv got standard suspension if you wana bang that on for a week or so till you get it sorted
- Sat Nov 16, 2013 8:59 am
- Forum: Problems / Questions
- Topic: 1.5dci engine juddering at cetain throttle position
- Replies: 18
- Views: 14397
Re: 1.5dci engine juddering at cetain throttle position
Mine does it in 4th and 5th gear doin between 30-40 mph, i think its a throttle pedal issue but as of yet i dont have anty dtc's
- Mon Nov 11, 2013 4:19 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
It would have to be a big shunt to damage the subframe! And spec wise i said just compress them 60mm at the tighter wound end
- Mon Nov 11, 2013 1:40 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
Have to be pretty strategic on most but its not too bad, its the subframe tats hits more often than not but if you go think about it its not too bad
- Sun Nov 10, 2013 10:33 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
- Sat Nov 09, 2013 4:54 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
No none at all touch wood, they ride lovely! I cut around 20mm off the bump stop aswel just to make sure it wouldnt hit them pitch me off the road!
- Thu Nov 07, 2013 3:13 pm
- Forum: Modifications
- Topic: need the front lower
- Replies: 46
- Views: 23511
Re: need the front lower
Yeah o read your other thread!
If you get the front to sit level with the tyre, the subframe will be very close to the floor!
If you get the front to sit level with the tyre, the subframe will be very close to the floor!