The Mégane II Owners' Club

Hi,
there may be bleed screws you haven't found.
Take a look on you tube at a Scenic under 'renault coolant airlock', see if yours is similar.
Bob.

Good price.
Bob.

Hi,
I'm sure it would be fine.
In my car now having done 170k l do put 10/40 as it's a bit worn, still goes well though.
The lower number is the viscosity when hot, the higher when cold, Elf is a good name.
Main thing is to do oil changes and don't neglect, many do and come unstuck.
Bob.

Hi,
could be blocked, leaking if screen wash going down, or motor faulty not pumping l would have thought.
Bob.

The 16 and 17 is diameter of wheel. Effects mostly just the looks the 17 are slightly lower profile.
Bob.

Hi, can't find a picture of it, but l think it's a metal tube type like l had on a Clio once. The tube can be removed though it's not easy. You'll see on you tube a couple of ways to do it without removing the tube but it depends somewhat on how far down and how tight it is. If its fairly tight and ...

Hi,
It's just a matter of preference, l use ebay and have no problems.
The filter is so small nowadays l like to change the filter mid way between oil changes.
Bob.

Hi,
what engine and year ?
Cheers Bob.

Hi,
if you just google it and mention megane it'll bring you back to it.
Bob.

All the electronics and this kind of stuff is what can make motoring a nightmare nowadays.
Just an intermittent poor contact or broken wire can cost a lot of time and money.
Glad it's sorted.
Bob.

Hi, the old belt will have been stretched a little and sometimes I have had this problem. Across the cams has to be tight and also down to the crank. It will only edge on to the sprockets. The main tip is, ONCE IT'S ON YOU MUST TURN THE ENGINE OVER TWICE WITH A SPANNER BY HAND USING THE CRANK BOLT T...

Hi,
watched video, engine altered when you touched that loom.
I have delphi autocom, good aren't they.
Just got to find that wire, solder the joints when you fix and use same size wire.
Good luck
Bob.

Hi, if it is intermittent and not all the time, the chances are it's electrical bad connection somewhere, even a broken wire. Sometimes a wire can break inside it's plastic covering and can only be found by testing continuity, very hard to find. Look on you tube about testing continuity if you don't...

Hi, this code can be triggered by many things but if l were you l would :- Check for air in system and while engine is running, bleed the injectors. If not done lately, replace fuel filter and check old one for metal bits with a magnet. Make sure it is bled properly and check with a clear pipe on th...

The abs ring nowadays is prone to this, it looks like a plastic ring and does come with the bearing.
I would guess the garage is right and has to be eliminated, after that it would have to be the sensor itself.
As the bearing is quiet it's just bad luck.
Bob.