The Mégane II Owners' Club

Eddie- wrote:fit it you mean sure it just goes in the tow same as the towing eye not much to it lol

but you need the correct size bolt etc otherwise you aint going to have much luck!

i have a trs strap and now have no idea how to dit it!
also what hardware and/or sizes did you use

thanks
Ryan

Eddie- wrote:they can go that low on the back prob only a 65 though but will not floor the car if that's what your after, will drop it but to other car's will not have the low's effect

i just want rid of my archgap tbh!

anyone had any experiancce of these?
to fit my 1.6 dynamique
can they reely lower as much as they quote?

https://www.corbymotorsport.com/megane-m ... -1155.html

ah ok so 65 70 is the lowest? and for how much and where from etc?
as 40mm woult still leave at least a 40mm arch gape - too much IMO :P

any kits that allow me to go a little lower than that?
the first link was very much like the ones i first saw - though these let me go down to 80mm
and the coilovers doesnt say how low, if they were epic low i would bite the bullet and go for them

anyone know where i can get any shcoks or coilies (trying to avoid just springs if pos)

i saw a while back on ebay the adjustable shocks between 20mm and 80mm but now they have disappeared
dont want t spend too much on them

thanks
BROCKY

so after having my sub proped up to oneside of my boot in my meg for the past 6 months i have finially decided to take action! i want my full boot back! my original plan was to sink the sub into the floor with a window just to the left for my amp, then cover the whole top in a carbon fibre sheet but...

its an '03 1.6 vvt dynamique sporthatch OK on a motorway it can be alright with the most ive ever had it was at 46mpg (and rising) but day to day driving lately ive only been able to get around 26mpg (trip comp reset every few days) and this hasnt been me gunning it or foot to the floor or anything ...

not xenons
just halogen projectors

easy enough to fit? straight swap? after coming to a conclusion that xenons are ni on impossible to fit thought just projectors + HIDs will be the better option? or ive had alot of talk about these "led" beams any good? also anyone know where i can get any/any got any for sale] thanks BROCKY

i dont want to go after market - as i would prefer the car to be mostly OEM
and to do this id prefer to just use 225/175/cup set up

anyways,
what would i need?
ive got a 1.6 dynamique

struts, and hubs?

thanks
Ryan

bought some 182 alloys (same as 225, just 2" smaller) as they are the same stud fitment my current wheels have got tyre pressure sensors on them (to my understanding its the valve with a chip on the end of it) can i just take them out of there and put them in the new wheels, just a straight swa...

nah ive done it before on my clio
i meen is it a straight swap for the actuall clock unit etc etc

i did an LED conversion in my clio, but since all the ph2s are in white LEDs it would be easier to just swap it all over is it as simple as this?, just plug and play? items im looking to do, climate controler, digital clock and clock unit (speedo, revs etc etc) obviously the clocks would have to be ...