Search found 108 matches

by craigyt
Mon Mar 20, 2017 9:37 pm
Forum: Megane III
Topic: 1.5 dci plastic intercooler section
Replies: 2
Views: 506

Re: 1.5 dci plastic intercooler section

Yes, if i remember correctly yes it should have a rubber insert, sort of a top hat shape
by craigyt
Sun Mar 19, 2017 9:41 pm
Forum: Modifications
Topic: Upgrading my car to cruise control....
Replies: 2
Views: 1121

Re: Upgrading my car to cruise control....

First thing to do is remove the headlight levelling switch n dash light dimmer panel and see if you have the white plug behind it. If you dont you cant add cruise control!

I think i bought the only 2 megane estates without the plugs!!!!
by craigyt
Sat Mar 18, 2017 10:40 am
Forum: Problems / Questions
Topic: "Check Injection" and Service light on when I hit 3200rpm.
Replies: 30
Views: 6106

Re: "Check Injection" and Service light on when I hit 3200rpm.

The egr on the 1.5 is easy to get to. Take the engine cover off and its more or less infront of the drivers seat on the back of the engine. Its built into the inlet manifold
by craigyt
Tue Mar 14, 2017 7:07 am
Forum: Megane III
Topic: I think I've bought a bad one
Replies: 2
Views: 775

Re: I think I've bought a bad one

Just keep taking it back untill the issues are sorted! If he wants to keep throwing money at it let him!

Its a pain the the arse butif all else fails he will have to drop an engine in anyway!
by craigyt
Mon Mar 13, 2017 10:14 pm
Forum: Megane III
Topic: Newbie to dci
Replies: 2
Views: 630

Re: Newbie to dci

Yes its down the back under the inlet manifold/egr valve
by craigyt
Mon Mar 13, 2017 12:37 pm
Forum: Problems / Questions
Topic: Starter Motor?
Replies: 3
Views: 486

Re: Starter Motor?

On the 1.9 dci it is round the back under the turbo down pipe. Are you sure its not just the battery that has failed to hold charge and not enough cranking power to turn the starter motor?
by craigyt
Sat Mar 11, 2017 9:37 pm
Forum: Problems / Questions
Topic: "Check Injection" and Service light on when I hit 3200rpm.
Replies: 30
Views: 6106

Re: "Check Injection" and Service light on when I hit 3200rpm.

Thats the start of the egr sticking. Get the egr off, give it a good clean, big chunks will come out of it and free off the plunger with plenty of easing fluid, gt85 wd40 etc etc. If you want to fix it and never have to worry about it again, buy a cheap used egr and plug it into the plug and cable t...
by craigyt
Wed Mar 08, 2017 8:55 pm
Forum: Problems / Questions
Topic: Megawows, trunk and wiper - Rage LOL
Replies: 4
Views: 574

Re: Megawows, trunk and wiper - Rage LOL

No, pull the rubber out either end to reveal the wires then pull each wire to see if its broken,
by craigyt
Tue Mar 07, 2017 10:31 pm
Forum: Problems / Questions
Topic: Megawows, trunk and wiper - Rage LOL
Replies: 4
Views: 574

Re: Megawows, trunk and wiper - Rage LOL

On mine the wires in the rubber boot at the top left of the boot lid had all split, a bit ove movement and it would work again, your could have started splitting and letting a bit of water in
by craigyt
Sun Oct 26, 2014 6:57 pm
Forum: Parts and Accessories
Topic: EGR Blanking plate (Megane 1.9 dci 120 2004)
Replies: 6
Views: 5423

Re: EGR Blanking plate (Megane 1.9 dci 120 2004)

I have a 1.5 DCI. When I bought the car, the previous owner had unplugged the EGR valve and told me it was harmless and did nothing to the engine as it runs fine with it unplugged. When I plugged it back in, for the MOT, it had blasted a piece of carbon down into my turbo and nocked the impeller of...
by craigyt
Thu Sep 25, 2014 3:20 pm
Forum: Megane Sedan
Topic: megane saloon with RS 225 is it possible
Replies: 1
Views: 1728

Re: megane saloon with RS 225 is it possible

Anything is possibly, it helps to know the right people! Iv done a full 1.5 to 1.9 dci and she runs beautifully just requires a remap to make the most of the hybrid turbo. The interior/dashboard looms are the same so it will be everything electrical in the engine bay that requires changing to overco...
by craigyt
Wed Sep 24, 2014 7:49 am
Forum: Problems / Questions
Topic: Window regulator, motor, or something else?.........
Replies: 4
Views: 689

Re: Window regulator, motor, or something else?.........

Mine was the black wire on the door connector as said above, was all green and corroded but had to go poking around to find the broken wire!
by craigyt
Wed Aug 27, 2014 8:36 pm
Forum: Problems / Questions
Topic: ready for starting but a few problems!
Replies: 3
Views: 618

Re: ready for starting but a few problems!

Well, got oil to the turbo!!

But still wont fire. Its saying immobiliser fault and check injection. I had the 130 eci virginised so shouldnt be an issue with immobiliser but iv just thought, iv had a 120 map put on but they run different egr and other bits, could this be my problem
by craigyt
Wed Aug 27, 2014 11:21 am
Forum: Problems / Questions
Topic: ready for starting but a few problems!
Replies: 3
Views: 618

Re: ready for starting but a few problems!

Nice one cheers dude
by craigyt
Wed Aug 27, 2014 6:19 am
Forum: Problems / Questions
Topic: Loud knocking noise - Engine swap time (1.5 DCI 105)
Replies: 5
Views: 1292

Re: Loud knocking noise - Engine swap time (1.5 DCI 105)

Just slap a 1.9 in like me!!!

Go to advanced search