The Mégane II Owners' Club

people have to remember Renault are no better than other motor manufactures they build crap systems that don't work then try to get out of correcting the fault You have just said it yourself, Ive had Toyota's, Fords and Audi's.....all have had at some point had they share of problems. Alan All cars...

Just had a call from EVANS HALSHAW, SHEFFIELD who confirm it is the wiring and the heater motor resistor,
7701207876 resistor air con £52.73
8200729298 it kit cablage comma £31.11
labour £148.28 thats after 3 hours of dignosetic

Sent a email to Renault Uk. What lovely customer service. they waive the Fees. the garage phone in the afternoon they cant find the fault and will need further 2 hour investigation. the garage rang Renault uk on my behalf to see what they can do for me. Renault uk rang me and said they will cover th...

just add acouple of bits. when pushing the drill bit in, It needs a bit of force as to move the airbag out of the clip then the air bag should come slidle off quiet easy upwards. when disconnection the airbag the wiring should be disconnect from the airbag side. there is a clip on each side you have...

Rang renault to see if mines on recall and they told me to ring dealer? rang local dealer EVANS HALSHAW, SHEFFIELD. he wasnt aware thete was a air con recall? :shock: after i gave him chassis number he said my car is not on it. ask him how much to diagnose the fault. it was £86ish + vat! wtf £100 to...

i have the exact same problem. phone renault and see if your car is on the recall list, common faults are the pressure switch, its a bumper off job

wouldnt trust any muppets from kwikfit, as they are on comission and they charge top $$$ for 20 year old mechcanic wannabes to do the work, list the problem for a £2000+ bill?

if you can take the front bumper off, it is held on by a 14mm nut. and quiet easy

Well Renaults checked out Air Con and its working.It was related to a recall so its going back in on Friday to have a new wiring loom fitted.Its seems the pressure in the air con is to great and shuts down so a reprogram is also needed.Its got me thinking now if i could have cleared the error codes...

just took sensor off, there is 3 wires when i short the bottom two together the engine stalls, if i short top and any of the bottom wire nothing happens? does it mean it is not the sensor?

Hi dougie yep it could well be.I think it will be a case of removing pressure switch short the contacts and see if the condensor kicks in. has anyone try this? just though if i short the circuit and the system works then i will get the pressure sensor replace. how much is the pressure sensor? part ...