The Mégane II Owners' Club

davelowe wrote:

mintsauce55 wrote:do you have a haynes manual ?

LMAO! Have you read the Haynes, then tried applying it in real life!?

Haynes manual was spot on for my model , maybe mines different ?

once you've got the upper piece of trim unclipped and taped up you have to unclip the lower part then it comes off in one complete piece , do you have a haynes manual ?

i pulled push/pulled mine up by hand , got the wife to hold it while i unclipped it and then just lifted the glass out , a bit fiddly but not that bad , i had to replace my complete front window regulator last week

if you remove the offside front wheel arch liner (just the front half where the inspection hatch is you can get to the washer bottle through there , you can reach in and replce the pump , i got my pump from a citreon dealer , way cheaper than a renault one

my 1.9dci spare is a standard steel wheel with A 205 55 16 same as the fitted tyre size if that helps

Hi ,
i did mine last week , but i just bought a pair of rear discs from renault that come with the bearings already fitted , makes it a bit easier £120 for both discs and pads ...bargain i thought

I paid £750 last month , same thing happened to me apart from the revving to 4k bit , the chap i had to do mine is an ex renault tech come to your premise and does the job , i can sort the number out if you like

Hi ,
My turbo on my 1.9dci megane 2 blew yesterday on my way back from Wales , could anyone give me a rough idea of how much i'm going to have to stump up to get it replaced ?
regards
Tony

Hi , wonder if anyone can help me , i've just had to replace my engine bay fuse box or upc i think is the proper name due to water getting into the old one , now i've read on a couple of sites that i have to get the replacement one coded to the car using one of the renault clip machines , my questio...

Hi , i have a Megane 1.9dci and the sidelights wont work , or the illumination for the heater buttons and auto climate controls , according to the book the fuses for both of these circuits are in the fusebox in the engine compartment and are both 7.5a fuses , i've looked at both fuses and they look ...

ive got an alpine cda-9855r fitten in my 03 meg and my display and stalk controls work with alpine adapters

the connector where the wiring plug clips onto was loose on mine so it worked somtimes but not others , i just solderd it and its fine now , just pop the light out and have a look its easy to do

hi , have you got a link to which box you've got as i'm looking for one as well , which model car have you got ?

i had exactly the same problem , caused by two dead cells in the battery spiking the electronic control unit making it all go haywire , new battery and the ecu being reset cured the problem