Search found 9 matches
- Sun Jan 26, 2020 1:36 am
- Forum: Problems / Questions
- Topic: rear camera fitting ?
- Replies: 4
- Views: 3358
Re: rear camera fitting ?
i just installed a rear cam and rear dash cam both fitted to tailgate dash is screwed to inner upper plastic and reverse to lower plastic depending on connections you can feed cable through the grommet from tailgate to car as for cable to reverse take light out pull grommet through dont matter witch...
- Sat Jan 25, 2020 8:11 pm
- Forum: Problems / Questions
- Topic: boot open when ignition turns on
- Replies: 1
- Views: 1685
boot open when ignition turns on
Has any1 had problems when you turn ignition on and the boot opens automatically
ive changed the fuse board in engine bay also changed boot lock and checked every fuse in the car and it still opens every time been doing it for about 2 months and its getting very annoying
ive changed the fuse board in engine bay also changed boot lock and checked every fuse in the car and it still opens every time been doing it for about 2 months and its getting very annoying
- Sun Jan 05, 2020 2:49 pm
- Forum: Problems / Questions
- Topic: wont start, electronic fault and immobilizer light on solid
- Replies: 4
- Views: 3640
Re: wont start, electronic fault and immobilizer light on solid
get a friend to start car and spray some carb/brake cleaner into the intake after a acouple of trie it should work i had same issue and it worked for me hope this helps
- Sun Jan 05, 2020 2:42 pm
- Forum: Problems / Questions
- Topic: Battery warning light.
- Replies: 4
- Views: 2713
Re: Battery warning light.
Check your alternater as that is the main cause 98% of the time for the battery light. Go to local garage to see if battery is charging . I installed a volt meter in my car as i like to see that the car is charging it averages around 13.8-14.2 ive placed it where the cigar lighter was and placed cig...
- Sun Jan 05, 2020 2:31 pm
- Forum: Parts and Accessories
- Topic: Airbag sign
- Replies: 2
- Views: 10129
Re: Airbag sign
I had a air bag light on my dash and found that it was the connection behind the steering wheel i swaped it over and light went.
To check connection you have to remove steering wheel and airbag to get access 1nce of its a 5 min job only costs aroung £10-15 on ebay its called airbag rotory coupling
To check connection you have to remove steering wheel and airbag to get access 1nce of its a 5 min job only costs aroung £10-15 on ebay its called airbag rotory coupling
- Tue Oct 15, 2019 1:38 pm
- Forum: ICE
- Topic: Replacing door speakers, is there a crossover?
- Replies: 1
- Views: 9724
Re: Replacing door speakers, is there a crossover?
If youve got coaxels (tweeter built in to speaker) then you dont need crossovers the original speakers useauly has the crossover built into them (the little resisters on the connections) :cool: if youve got componant speakers where the tweeter is seperate then the crossover is supplied in the front ...
- Tue Oct 15, 2019 11:48 am
- Forum: Problems / Questions
- Topic: Rubbish headlights
- Replies: 7
- Views: 4433
Re: Rubbish headlights
I upgraded to h7 hid aftermarket bulbs you can definitely see in-front with these but make sure there 8000k or above then problem solved PS i had to remove the bumper and lights to fit in also upgrade the 501 side lights to smd 501 but check before refit as they only work 1 way if 1st you fit and no...
- Mon Oct 14, 2019 2:40 pm
- Forum: Problems / Questions
- Topic: Injection fault
- Replies: 0
- Views: 1756
Injection fault
HI all ive just recently bought a megane 55 plate 1.9 dci130 dynamic my 1st ever french car and ive got issues with the start up as i have an injection fault with stop light on the dash The other faults i had was airbag light with spanner(solved by replacing airbag rotory behind steering wheel) sunr...
- Mon Oct 14, 2019 2:14 pm
- Forum: Problems / Questions
- Topic: Scraping noise when going round corners
- Replies: 2
- Views: 2385
Re: Scraping noise when going round corners
If the car has been lowered or bigger wheels put on then thats possibly the reason why as with folzzz reply wheel scrape on arch lining knocking would be cv joint/bearing on way out