Search found 6 matches

by neo123
Sun Apr 08, 2018 9:12 pm
Forum: Introductions
Topic: Hi guys
Replies: 1
Views: 1857

Hi guys

Hi guys new the forum,

have had a megane 1.5dci for a few years, i must say the car has helped me use my brand new tools that have stood idle in garage. :-)

Nevertheless happy owner..
by neo123
Sun Apr 08, 2018 9:08 pm
Forum: Problems / Questions
Topic: front shockers and spring
Replies: 3
Views: 2587

front shockers and spring

Hi my spring snapped on my megane 1.5 dci and i was wondering if anyone knew if the 1.5dci front springs are the same as the 1.4 petrol version for the same model car. Finding it very difficult to source second hand 1.5 dci version.

Renault megane ll 2003

thank you
by neo123
Mon Mar 12, 2018 4:58 pm
Forum: Problems / Questions
Topic: rear abs sensor mount rusted
Replies: 3
Views: 2421

Re: rear abs sensor mount rusted

so the abs resets when the car switched back on, so if the car is stationary the abs sensor connected it shouldnt come on?

when i move it should come?

before the disc change it was fine, the sensor was loose drove it down the road the light came on now its on all the time.
by neo123
Mon Mar 12, 2018 3:38 pm
Forum: Problems / Questions
Topic: rear abs sensor mount rusted
Replies: 3
Views: 2421

Re: rear abs sensor mount rusted

Hi, there's a chance you've disturbed the connector or wiring to the sensor. Check the continuity of the wires each side of the connector. As you probably know, when switched on, the light shows then goes out once the circuits have been checked. Good luck Bob. so dont need to reset the abs light it...
by neo123
Mon Mar 12, 2018 3:09 pm
Forum: Problems / Questions
Topic: rear abs sensor mount rusted
Replies: 3
Views: 2421

rear abs sensor mount rusted

Hi guys

Recently changed my rear discs and the rear abs mount just perished on one side, ive used some epoxy resin to put it on place but the abs light is still on.

Should that have gone off when i restarted the car?

Or do i need to get it on computer for reset?

thanks
by neo123
Fri Mar 09, 2018 11:20 pm
Forum: Problems / Questions
Topic: rear abs mount
Replies: 24
Views: 16595

Re: rear abs mount

Hi guys new to the forum, bumped this thread as it very relevant to my problem. I replaced my rear discs today and the abs sensor holder has perished, im thinking of gluing it, my question is how far does the abs sensor have to be from the abs ring on the disc. Do they have to be touching? Thanks in...

Go to advanced search