Hi guys new the forum,
have had a megane 1.5dci for a few years, i must say the car has helped me use my brand new tools that have stood idle in garage.
Nevertheless happy owner..
Search found 6 matches
- Sun Apr 08, 2018 9:12 pm
- Forum: Introductions
- Topic: Hi guys
- Replies: 1
- Views: 1858
- Sun Apr 08, 2018 9:08 pm
- Forum: Problems / Questions
- Topic: front shockers and spring
- Replies: 3
- Views: 2591
front shockers and spring
Hi my spring snapped on my megane 1.5 dci and i was wondering if anyone knew if the 1.5dci front springs are the same as the 1.4 petrol version for the same model car. Finding it very difficult to source second hand 1.5 dci version.
Renault megane ll 2003
thank you
Renault megane ll 2003
thank you
- Mon Mar 12, 2018 4:58 pm
- Forum: Problems / Questions
- Topic: rear abs sensor mount rusted
- Replies: 3
- Views: 2422
Re: rear abs sensor mount rusted
so the abs resets when the car switched back on, so if the car is stationary the abs sensor connected it shouldnt come on?
when i move it should come?
before the disc change it was fine, the sensor was loose drove it down the road the light came on now its on all the time.
when i move it should come?
before the disc change it was fine, the sensor was loose drove it down the road the light came on now its on all the time.
- Mon Mar 12, 2018 3:38 pm
- Forum: Problems / Questions
- Topic: rear abs sensor mount rusted
- Replies: 3
- Views: 2422
Re: rear abs sensor mount rusted
Hi, there's a chance you've disturbed the connector or wiring to the sensor. Check the continuity of the wires each side of the connector. As you probably know, when switched on, the light shows then goes out once the circuits have been checked. Good luck Bob. so dont need to reset the abs light it...
- Mon Mar 12, 2018 3:09 pm
- Forum: Problems / Questions
- Topic: rear abs sensor mount rusted
- Replies: 3
- Views: 2422
rear abs sensor mount rusted
Hi guys
Recently changed my rear discs and the rear abs mount just perished on one side, ive used some epoxy resin to put it on place but the abs light is still on.
Should that have gone off when i restarted the car?
Or do i need to get it on computer for reset?
thanks
Recently changed my rear discs and the rear abs mount just perished on one side, ive used some epoxy resin to put it on place but the abs light is still on.
Should that have gone off when i restarted the car?
Or do i need to get it on computer for reset?
thanks
- Fri Mar 09, 2018 11:20 pm
- Forum: Problems / Questions
- Topic: rear abs mount
- Replies: 24
- Views: 16597
Re: rear abs mount
Hi guys new to the forum, bumped this thread as it very relevant to my problem. I replaced my rear discs today and the abs sensor holder has perished, im thinking of gluing it, my question is how far does the abs sensor have to be from the abs ring on the disc. Do they have to be touching? Thanks in...