Search found 7 matches

by firewalk
Wed May 20, 2015 3:01 pm
Forum: Problems / Questions
Topic: Megane 2 (1.4) still won't start... :(
Replies: 6
Views: 4801

Re: Megane 2 (1.4) still won't start... :(

Your megane would need to be checked out at ecu pin no's. 2d4 key off 12v's. 1g1key on 12's. 2m2 key on 12v's. 3d1 key on 12v's. Can you check & post back Regards fredcamp2 Thanks for your reply! can you elaborate? Checked out how exactly ? Check for corrotion or perform some kind of messuremen...
by firewalk
Tue May 19, 2015 4:38 pm
Forum: Problems / Questions
Topic: Megane 2 (1.4) still won't start... :(
Replies: 6
Views: 4801

Re: Megane 2 (1.4) still won't start... :(

Buy me a pint and I'll tell you how I solved a similar problem with my 1.9dci. OK you can owe me, My car started cutting out and was getting "check injection" it got worse and worse until it cut out or wouldn't start every time I used it. When I connected it to a OBD reader there was noth...
by firewalk
Tue May 12, 2015 2:05 pm
Forum: Problems / Questions
Topic: Megane 2 (1.4) still won't start... :(
Replies: 6
Views: 4801

Re: Megane 2 (1.4) still won't start... :(

Thanks for your reply. I've checked all the fuses. Even took out the entire fuse box and checked the fuses underneath the box itself. All the fuses tested OK. I suspected something with the steering locking mechanism. Found out that the bolt holding it in place had become loose and fallen out, so I ...
by firewalk
Sun May 10, 2015 11:40 am
Forum: Problems / Questions
Topic: Megane 2 (1.4) still won't start... :(
Replies: 6
Views: 4801

Megane 2 (1.4) still won't start... :(

My 2003 megane 2 (1.4 16v) still won't start. When pressing the start button the starter turns over but there is no fuel or spark. I get the message "Check injection". Then when it shuts down I get "steering not locked". The RPM gauge sits at 0 all the time. It's supposed to move...
by firewalk
Sun Apr 26, 2015 10:56 am
Forum: Problems / Questions
Topic: Won't start! Starter is working. RPM shows 0
Replies: 3
Views: 2719

Re: Won't start! Starter is working. RPM shows 0

At this point I'm thinking it's the crank sensor. I hooked up a obd2 scanner and the thing is that when the ignition is on the RPM shows 180 and not 0. Tried to disconnect the sensor. RPM still shows 180 ?... While cranking it goes up to 240. Won't start, I can hear some random missfiring occuring. ...
by firewalk
Mon Apr 20, 2015 9:18 pm
Forum: Problems / Questions
Topic: Won't start! Starter is working. RPM shows 0
Replies: 3
Views: 2719

Re: Won't start! Starter is working. RPM shows 0

Your 02 megane this was the change over year from the mk1 to the mk2 if you can post up your engine code it would certainly help it either starts with k4j ??? or e7j ??? The correct engine code lets 1 know if it's a mk1 or mk2 & what system it's running on My bad, I typed in the wrong year, it'...
by firewalk
Mon Apr 20, 2015 7:28 pm
Forum: Problems / Questions
Topic: Won't start! Starter is working. RPM shows 0
Replies: 3
Views: 2719

Won't start! Starter is working. RPM shows 0

I did a search but couldn't find an anwser to this exact problem. What happened: the car was parked outside a store idling just fine. Then suddenly it just died and could not be started again. Starter is working fine but the engine won't fire up. The display shows a "Check injection" messa...

Go to advanced search