The Mégane II Owners' Club

If it is moulded on the other side you could drill a hole through to make it work, then use some instant gasket to seal it. Depends how DIY you want to go compared to spending on the new part

Do mean when you actually turn the wheels to the right or when the vehicle is moving to the right? Have you checked that nothing is catching on the wheel arches? Possibly they've been nocked when the new tires have been fitted? Could it just been the new tires? Like when you turn in a car park with ...

How does it connect on the rear? Couldn't you possibly DIY it with a long 10mm bolt? And a nut on other end?

Bumpety bump. Any ideas, advice etc guys? I've googled up a few things. Failing injectors, water temp sensor messing up fuel mixture, allot have said dephaser but I don't believe the 1.4 was has it fitted. Also just read a lad with similar idle issues relating to the air intake temp sensor. Going to...

Bit old now but id jack both sides up on axle stands. Very first time I did this on a golf ( wasn't very experienced then). I jacked up only one side the tension on the roll bar bent and snapped the bolt into the wishbone. I had to learn how to drill and tap a new thread quickly Then. Don't know if ...

Hi all The car in question is an 03 mk2 Megane 1.4, about 95 thou on clock, 5 door manual. Right problem is two fold but i think related. I get a noticeable surge and dip in power when im cruising with very light throttle. If I accelerate or put the engine under load everything is fine. She still pu...

Thank you very much my handbrake stopped working, would go the way up and still have no effect so his was perfect to see if the cables had snapped. To the lad posting before me mine is the same. One cable longer hen the other which I'm assuming is why one of my cables fell of the adjuster and thus n...