The Mégane II Owners' Club

I got it a couple of years ago its a 225 bumper that i smoothed badge and wash holes off. Im breaking the car if your interested.

The connecters was the same for the light except for the height adjustment the plug is different size.

i was going to try get the proper plugs and cut wires and crimp on but never bothered as i dont adjust them anyway.

Is there someone local to me that can read my car im in Chigwell, Essex. Ive tried a cheap code reader but it cant find anything. Having hot start problems so i changed the common things like crankshaft sensor, coolant temp sensor and fuel filter but none have fixed it and cant keep wasting money ch...

if you going to go for engine swap what about try and squeeze the 3.0dci in it as there over 200bhp with just remap

1.9dci what sort of noise am i listening for.

Had this problem for last couple of weeks now just cant get rid of it. Car starts fine from cold and drives around all fine but if i turn it off when cars at normal temperature it wont start again tried several times in a row it turns over but dont fire. If i keep pumping the accerlating pedal i can...

I didnt touch anything fuel related. Im not sure if it is air related now as it started fine with air in the lines. I think it could be hot start problem as when it start it works fine on off 5 times in row no problem but after a long drive it dont start again until next day. While engine bay was st...

I recently done a bit of work to car removing aircon pump and bits and i put it back together started fine running good had it idling for about 15mins then realised i was on empty so turned it off. Tried starting it and it turns over but dont fire up thats when i noticed some air in fuel line. Put a...

Im only changing the headlights so will be making them fit! Straight away away can see the new ones are bigger. http://imagizer.imageshack.us/v2/800x600q90/823/hknv.jpg They fit in places fine and bolts line up underneath them. http://imagizer.imageshack.us/v2/800x600q90/842/ngqwy.jpg http://imagize...

drivers side the same route the cables go.

That says about dpf and not egr so should be fine.

Can always leave egr in and just unplug it so it is still physically there but just not working.

Ive been driving mine for about 2 years without one on and its been fine.

I found the undertrays make it harder to tell if you got an oil leak as it collects on there and not the floor.
also if your working under the bonnet and you drop a bolt you have to then take the undertray off to get bolt.

Theres a picture of my pioneer double din fitted.
just had to take old headunit and bit underneath cut that center plastic so its one big whole.
fit double din cage with facia trim then put headunit in with the headunit trim round that.

im not sure how much performace difference they make but the thing i most liked was they have lifetime warrenty so i just clean it couple times a year and never needs replacing.

The 1.5dci egr setup looks very different from the 1.9dci

im just going to cut off and block that little pipe from exhaust manifold that goes up into inlet manifold