Search found 33 matches

by markrnorton
Thu Jan 26, 2012 7:50 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

tyres are 225 40 18 92Y, so 92 on load rating
by markrnorton
Thu Jan 26, 2012 6:44 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

not sure of the load rating, will need to check
by markrnorton
Wed Jan 25, 2012 7:39 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

Car is lowered about 45mm

wheels are team dynamics jordan type R's, bought them from Ash tyres in newbury park
by markrnorton
Wed Jan 25, 2012 12:19 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

DragTheLake wrote:that has been lowered hasn't it?


yes it has, well spotted. Eibach springs
by markrnorton
Wed Jan 25, 2012 9:16 am
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

where did i get what ?
the car ? wheels ? or spacers ? !!!
:D
by markrnorton
Tue Jan 24, 2012 1:25 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

Image

The spacers are only on the front wheels
by markrnorton
Mon Jan 23, 2012 3:07 pm
Forum: Modifications
Topic: BBS RS :) 18x8! What you think?
Replies: 30
Views: 19629

Re: BBS RS :) 18x8! What you think?

Hi, i have 18"x8 ET35 TD Jordan R's on mine with 225 tyres and 15mm hubcentric spacers, they fill out the arch nice.

i have a set of 15mm hubcentric spacers if you are interested ? (PM me)
by markrnorton
Mon Jan 09, 2012 8:29 am
Forum: Modifications
Topic: Personalised plates
Replies: 3
Views: 2369

Re: Personalised plates

Me too, DVLA
by markrnorton
Mon Jan 09, 2012 8:27 am
Forum: Modifications
Topic: DCi the mods are starting !
Replies: 18
Views: 8871

Re: DCi the mods are starting !

Brakes bled out easy. No problems there. Pedal is slightly longer, but it bites alot harder when pushed home than the original brakes. If changing the M/C was an easy job, i would probably enlarge it.
by markrnorton
Thu Jan 05, 2012 9:13 am
Forum: Modifications
Topic: Megane / Scenic hubs compatibility
Replies: 2
Views: 2062

Re: Megane / Scenic hubs compatibility

Had a look at these myself, grand scenic discs that is. I opted for the Fiat discs as they are 28mm thick and the scenics are only 24mm thick
by markrnorton
Thu Dec 15, 2011 4:30 pm
Forum: Modifications
Topic: DCi the mods are starting !
Replies: 18
Views: 8871

Re: DCi the mods are starting !

Well I got lucky with the Brembo's, sold a pair of 6 pot calipers and then saw them on ebay, probably about 6 months ago.
Didn't really need them at the time, but i was the only bidder, so i got them for £125 the pair !
by markrnorton
Wed Dec 14, 2011 12:41 pm
Forum: Modifications
Topic: DCi the mods are starting !
Replies: 18
Views: 8871

Re: DCi the mods are starting !

Well, finally got round to finishing the brakes off Took a while as i have been busy, but here's a bit of the story Before ! http://img.photobucket.com/albums/v230/markrnorton/Megane%20dci/DSCN2760.jpg Then a quick clean up of the hub assembly and new disk fitted http://img.photobucket.com/albums/v2...
by markrnorton
Thu Nov 17, 2011 11:08 am
Forum: Modifications
Topic: test fit
Replies: 2
Views: 2210

Re: test fit

just got some 225 40 18's myself. I went for falken 452's. very good so far. not too noisy and very grippy.
by markrnorton
Mon Nov 07, 2011 8:00 pm
Forum: Parts and Accessories
Topic: ***DE Cat Pipe*** Where can you buy 1?
Replies: 81
Views: 28017

Re: ***DE Cat Pipe*** Where can you buy 1?

Fabrication isnt so difficult. I have made loads of exhausts and manifolds over the years.

I'll get the flanges cut, then make a jig and fab up.

should help with a full 2.5" free flow exhaust

Go to advanced search