I'll take a look at that shortly. I also took photos before I put things back together so I'll load those up.
Definitely a different installation and multiplex unit so that explains the issues
Search found 169 matches
- Wed May 18, 2016 8:21 am
- Forum: Problems / Questions
- Topic: Bloody french designers
- Replies: 4
- Views: 4171
- Tue May 17, 2016 8:01 am
- Forum: Problems / Questions
- Topic: Bloody french designers
- Replies: 4
- Views: 4171
Re: Bloody french designers
Hi, well I can tell you as I said the fuse box lid is perforated and has to be "broken" the 1st time the lid comes of, a little like the covers over the wiper bolts. Agreed after that it's simple. Now, I would not advise anyone to tackle this without disconnecting the battery, you have tha...
- Sun May 15, 2016 11:59 am
- Forum: Problems / Questions
- Topic: Bloody french designers
- Replies: 4
- Views: 4171
Bloody french designers
The wifes 2007 megane has been a pain in the jacksie blowing headlight bulbs way to often, anyway another went a few weeks ago and when I checked the dipped light connector was loose and had over heated and damaged the plastic, the bulb was fine. So ordered a couple of ceramic connectors from China ...
- Tue Apr 30, 2013 1:14 am
- Forum: Problems / Questions
- Topic: Possible 1st ever trip to a garage with a problem, ABS
- Replies: 8
- Views: 5148
Re: Possible 1st ever trip to a garage with a problem, ABS
Just for information, when the ABS light comes on, it should clear without having to reset the ecu once the fault has been rectified. I know this because my front passenger side sensor came undone and when refitted, the wheel was only turned slightly with the engine running (during refitting the wh...
- Thu Apr 25, 2013 4:06 pm
- Forum: Problems / Questions
- Topic: Possible 1st ever trip to a garage with a problem, ABS
- Replies: 8
- Views: 5148
Re: Possible 1st ever trip to a garage with a problem, ABS
AlexB wrote:Very good! What scanner did they use?
Didn't ask Alex, was too grateful, but when I have fitted the new sensor that is now on it's way, I will ask and report back.
- Thu Apr 25, 2013 11:04 am
- Forum: Problems / Questions
- Topic: Possible 1st ever trip to a garage with a problem, ABS
- Replies: 8
- Views: 5148
Re: Possible 1st ever trip to a garage with a problem, ABS
Thanks Alex again, however I may have the issue resolved now. Good news is, and this reinforces what I've always said about getting a relationship going with a decent non affiliated local garage, inspite of what I have read re the abs not being able to be read from the main ecu, it can be. With ther...
- Thu Apr 25, 2013 8:36 am
- Forum: Problems / Questions
- Topic: Possible 1st ever trip to a garage with a problem, ABS
- Replies: 8
- Views: 5148
Re: Possible 1st ever trip to a garage with a problem, ABS
Thank you alex, I did wonder if I'd actually fixed the issue and it simply needed resetting, but to be honest I'm at the limit of my experience after a lifetime of motoring practice. I have heard of chip, is this the official renault interrogatory system? or something non franchise outfits use? I'm ...
- Thu Apr 25, 2013 7:42 am
- Forum: Problems / Questions
- Topic: Possible 1st ever trip to a garage with a problem, ABS
- Replies: 8
- Views: 5148
Possible 1st ever trip to a garage with a problem, ABS
In true miserly tradition, I have yet to take a car to the garage for anything other than the mots. But I'm stumped with this 1 so I may have to admit defeat and cough, :cry Renault megane est, ABD and ESR and ASR warnings lit up. If anyone can sense check this for me I'd appreciate it All wheels re...
- Tue Jan 01, 2013 3:49 pm
- Forum: Problems / Questions
- Topic: steering not good
- Replies: 3
- Views: 3189
Re: steering not good
Mine has developed looseness at 65k miles. Over the last month or so it feels vague, it feels like the wheels are out of balance and it rattles over kerbs and pot holes. Finally got around to jacking the bugger up today and it's both inside track rod ends that are shot, ie, at the point at which the...
- Sat Sep 03, 2011 2:28 pm
- Forum: Problems / Questions
- Topic: Clutch advice... (but not the car start issue!)
- Replies: 9
- Views: 13242
Re: Clutch advice... (but not the car start issue!)
I know this is an old post but,,,,,,,,,,,,,,,,,,,,,,,,,, I have juist spent 3 days trying to bleed my cars clutch'. As an introduction it's a 55plte 1.5 dci 106 estate. The clutch has been a problem since I bought it at a year old. I've lost count of the number of times the pedal return spring has f...
- Mon Jun 20, 2011 7:07 am
- Forum: Problems / Questions
- Topic: Dam Renault dealership quality
- Replies: 2
- Views: 2289
Re: Dam Renault dealership quality
hy there, im sorry for your poor experience with Renault. What im going to say doesnt go to solve your problem but will put some pressure under the dealer: your new spares mounted at the dealer have an 1 year full warranty, i.e., if you need to go through the 10nd turbo sensor or diesel return pipe...
- Sat Jun 18, 2011 5:05 pm
- Forum: Problems / Questions
- Topic: Dam Renault dealership quality
- Replies: 2
- Views: 2289
Dam Renault dealership quality
:hm Ok, after today I just felt I had to post this. It sums up my experience with the local outfit that repaired my car under waranty. I bought a 55plate 1.5 105 estate back in early 2007, 28k on the clock at exactly a year old, the way I like to buy them. This car has been great, is super economica...
- Mon Apr 18, 2011 7:33 am
- Forum: Problems / Questions
- Topic: megane hatch 1.5dci bottom engine mount "dogbone"
- Replies: 3
- Views: 2915
Re: megane hatch 1.5dci bottom engine mount "dogbone"
Pt No is 8200042453 and for anyone looking for one on ebay, it the plaqstic skeleton type rather than the twisted steel strap. No photo as all now covered up,
- Sun Apr 17, 2011 7:39 pm
- Forum: Problems / Questions
- Topic: renault megane ll cutting out
- Replies: 12
- Views: 6460
Re: renault megane ll cutting out
Well whitey I might just be able to help you there. I bought a 2005 1.6 dynamique last week also. For my daughter. See the post I put up a week ago Same issue as you plus others. Ticked over at only 500 rpm hot or cold, tried to stall when pulling off in 1st either hot or cold. Taking off the thrott...
- Sun Apr 17, 2011 7:29 pm
- Forum: Problems / Questions
- Topic: megane hatch 1.5dci bottom engine mount "dogbone"
- Replies: 3
- Views: 2915
Re: megane hatch 1.5dci bottom engine mount "dogbone"
It doesn't matter now, but I can tell you,