The Mégane II Owners' Club

I have absolutely no idea if the parts used were genuine Renault or not. Is there an easy way to tell? The pipe work looks good but who knows? As I said there is fuel in the line up to the bellow, then the lines have no fuel from the bellow to the engine. I have attached a picture, you can just make...

Can I have some advice please? About a year ago my 2003 1.5DCI had a complete new fuel system put in (long story, fuel pump issue, very expensive no going into it!!) Since then it has run like a dream and has made me fall back in love with my Meg. However occasionally it will take 2 or 3 goes to sta...

Update: A full 60 days after the thing broke down, I am now faced with a bill of £2000 +VAT for almost a complete new fuel system!!! The garage and chap I brought the car from think that the fuel had been contaminated due to evidence of metal fragments in the filter, this is despite prior to this th...

Update:

The ECU has had to be sent off for check/repair. Not going to get the car back until at least Wednesday. Grrrr

Currently having a very similar problem:

[url]https://www.meganeownersclub.co.uk/forum/viewtopic.php?f=2&t=15469&sid=c3146bb225a0faa0de87929c688142b6

Prehaps I haven't described it properly. The car started and ran after the initial change of sensor, when I left the garage with it started fine and I drove off, after a mile the fault came up on the display again, i pulled over the engine ran for a few seconds (and appeared to be running normally, ...

Update: The mechanic is still hunting!! The new sensor has been electrically tested and is servicable but the injectors are still not recieving a signal, he is going to do a bit more investigating but if that comes to nothing he is looking at getting the ECU checked out. If the injectors are not get...

Thanks for the info. The mileage is 69K, the mechanic is looking at it again today (not looked since Friday due to New Year) will see what he comes up with and go from there. I will pass on your suggestions if he draws a blank today. Might be a stupid question but what is an OBD machine? If it is th...

had this one, it is the wire connections on clutch start micro switch, easy to fix have a good search on here will find how to fix it.

Have had mine 2 months too and have fixed it twice, first time was a bit of a bodge but did it properly and no snags now.

Has anybody got any ideas about this one? Have a 2004 1.5 DCi was travelling along at around 70mph then had 'Injection Fault' come up on the display and the STOP light pulled over engine still running message disappeared along with 'STOP' light, pulled away again fault and light came one almost stra...

yes, have checked that. It is set to zero.

Someone help/advise!! Had a bit of a nose around and even fitted new bulbs for the full beam but makes no difference!! :banghead The bulbs are defiantly fitted correctly but the full beam is still too low, I live in the countryside and driving down an road that has no street lights at 60mph and havi...

OK, ok sorry I'm and idiot.

Found some advice on here for headlight adjust : viewtopic.php?f=10&t=6307

Have read a load of headlight related issues on here and am still confused. :conf Only got my Meg 3 weeks ago but have noticed that when the headlights are on everything is fine (alignment/brightness etc) however when I switch on the main/full beam I only illuminate the same area that the headlights...