The Mégane II Owners' Club

stick your finger in the hole....... works for me!

This kind of was my plan all along, but just wanted to check if there was a more "adéquat" method

thanks you

Hi guys, I’m about to purchase a 3pin reverse switch from GSF (cheapest I can find) as my current switch suffered a breakage when the engine fell as a result of an engine mount unscrewing its self.... bhut that’s a different story! My question is, when I unscrew the existing switch from the gearbox,...

OK - I maybe screwed up a little - but this may be useful for someoe else.... I checked the 7.5 amp fuse in the engine bay and found it wasnt blown, i concluded it wasnt a fuse issue = however I recently discovered this > (S) 3 A Passenger compartment temperature sensor and fan - autodimming rear-vi...

Hi all, its been a little while since I had an issue on my 54 1.6 dynamiq.... but sure enough they're back - little long winded but please read through and help if you can It seems I have 3 issues which are all connected - and i'm stumped :banghead Last week I noticed my auto-dimming rear view mirro...

At what point did I say they were torqued to the correct ammount ? I had a problem which i found a fix for and i shared it..... isnt that the point of these forums ? would it not have been more constructive to say " these are supposed to be tightened to 105nm, your best bet would be to ...........

Hi Guys, sorry to dig up on old thread, but i thought it might be useful, now you may recall I had this issues with my Megane..... http://www.youtube.com/watch?v=tHBB1co_C24 Several places confirmed the power steering rack was buggered and my only option was a new rack + fitting.... £300! Well as it...

Ill get the code on sat and update for you, but i got halfords to mix it up - infact i used all halfords products to do it, plastic filler primer / celulose / sandpaper / rubbing compound / polish.... and a spraygun/compressor

Hi all, I have just plugged a friends new 225 - 2004 into my USB OBD Scan and it brought up 3 codes - P0301 - Cylinder 1 Misfire Detected P0325 - Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor) P0313 - Misfire Detected with Low Fuel Now I understand the misfire could be caused by a faul...

Depahser pulley - YEP, MINE WAS SAME, HAD IT CHANGED 22 MONTH AGO, AND IT "MIGHT" NEED DOING AGAIN Clicking on the steering wheel when i turn in to full lock and sometimes while driving....... YEP, MINE IS SAME, MINE IS STEERING RACK, BUT CHECK THE TOP STRUT MOUNTS / BEARINGS FIRST Front ...

Well, bit of an update for anyone intrested, got all the plastics done and on the car.... one or two little mistakes but nothing major, and im a novice https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/202561_10150936420682163_1990930688_o.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/...

£165 inc VAT/fitting (give-or-take) for a new heater motor resistor and wiring loom (mine had burnt out)- it's what mine needed. bloody hell, im glad i got mine sorted before the wires melted, i could see smoke and smell burning a few times, but luckily i caught it before it was too late, and all i...

So, got some more work done > After some serious wet sanding on the front plastic > https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/560921_10150923144357163_260291963_n.jpg Primed back bumper > https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/557079_10150929164597163_1932825284_n.jpg Got so...

I think you're right, im going to avoid the wheels, and possibly refurb the standard alloys and have them painted. - will keep updated with pics as i go > got the front and side strips primed and ready for paint, low funds have put a temp stop to the rear, hope to continue next weekend with that one...

Hi guys, so i have a 54 1.6 5door Megane in the nice blue - but I’m getting a bit tired with its stock looks - so I was thinking of a few subtle changes to give it a fresh appearance, but id like you advise before I start spending money.... firstly I plan to lower it by 35mm with some new springs > ...

so the sub frame has to be droopped ?

bugger.....

im going with this one.... https://www.ebay.co.uk/itm/150668222050? ... 1423.l2649

£89.99 + return of old rack. but before i buy it i want to know if i can fit it or it has to be a garage job.