Search found 3922 matches

by AlexB
Fri Sep 09, 2022 10:17 am
Forum: Links
Topic: Programming Renault Tyre Valve Sensors
Replies: 2
Views: 40778

Re: Programming Renault Tyre Valve Sensors

Apparently, it is very easy to disable the tyre pressure monitoring system in the ABS computer. Use ECU Tweak tool for Android and ELM327 for it, as in my other thread.
by AlexB
Fri Sep 09, 2022 10:14 am
Forum: Links
Topic: Tyre guide..
Replies: 5
Views: 28201

Re: Tyre guide..

Revisiting many years after... When changing the rim/tyre size it is possible to bias the readings of the speedometer. This can be corrected by updating the configuration of the ABS computer with Clip or a free tool ECU Tweak , see my other thread about free software tools and EM327 interface. With ...
by AlexB
Thu Sep 08, 2022 11:18 am
Forum: Links
Topic: Free Renault Diagnostic Software Clip-like: PyClip (PyRen), ECU Tweak (DDT4All), AndOBD
Replies: 0
Views: 36934

Free Renault Diagnostic Software Clip-like: PyClip (PyRen), ECU Tweak (DDT4All), AndOBD

I've been using these for a while, decided to share... Clip diagnostic computer is expensive, but this days one can get similar functionality with free programs for Android (or other computers) and a cheap interface unit based on ELM327. For Android one needs an OBD box having either Bluetooth or Wi...
by AlexB
Thu Dec 27, 2018 11:23 pm
Forum: Problems / Questions
Topic: low battery warning
Replies: 18
Views: 52477

Re: low battery warning

I meant that there can be corrosion damage to the UPC if the wheel arch liner let's spray in. This is easy - either fix the visible damage or replace the block. This is what garages usually do. If it is OK, then significant expertise will be needed to check the functions of the individual signals. T...
by AlexB
Tue Dec 25, 2018 11:12 pm
Forum: Megane III
Topic: Clutch not returning to position / bleeding the clutch
Replies: 3
Views: 20825

Re: Clutch not returning to position / bleeding the clutch

This part looks like a clutch damper (sometimes called clutch resonator, perhaps due to imperfect translation from French), but in the workshop manual it's called "piping with filter" (unclear whether they meant a sediment filter or vibration filter). The damper's only purpose is to reduce...
by AlexB
Tue Dec 25, 2018 7:20 pm
Forum: Everything Else
Topic: Merry Christmas
Replies: 1
Views: 15326

Re: Merry Christmas

The Truth is born. Best wishes to all!
by AlexB
Mon Oct 16, 2017 3:04 am
Forum: Problems / Questions
Topic: Megane II 1.4i Firing issues
Replies: 3
Views: 11505

Re: Megane II 1.4i Firing issues

My guess is that the buzzing noise is either solenoids or the stepper motor on the throttle. When the ECU is unsure about throttle position, it attempts to close it. A problem with the battery voltage may trigger such a behaviour. Some electrical buzzing is usually heard under the bonnet just before...
by AlexB
Sat Oct 14, 2017 5:30 pm
Forum: Problems / Questions
Topic: Megane II 1.4i Firing issues
Replies: 3
Views: 11505

Re: Megane II 1.4i Firing issues

The next time this happens check the voltage of the battery. It may be loosing charge overnight, but then quickly charges once the engine has started. Check, clean and protect with silicone or other grease the terminals and any associated contacts. I think the problem is somewhere around the battery.
by AlexB
Sat Oct 14, 2017 3:50 am
Forum: Problems / Questions
Topic: Easy Fix for Clicking Door Strap/Retainer
Replies: 0
Views: 6711

Easy Fix for Clicking Door Strap/Retainer

The driver's door was clicking loudly. Upon some research I found that this is often caused by the retainer shifting up or down in its rollers. So, looked into mine - it was in the low position. Apart from this, everything looked good. I found a cheap solution not involving taking off the door panel...
by AlexB
Sat Oct 14, 2017 3:25 am
Forum: Links
Topic: Megane III inc. R.S.250 cabin filter replacement guide
Replies: 3
Views: 34045

Re: Megane III inc. R.S.250 cabin filter replacement guide

The same job again - took just over an hour, and bruises were avoided by padding the door sill with sheet foam. It is still a pig of a job... The first step is to remove three pieces of plastic: pull the kick panel near the clutch pedal, pull the panel near the door with the airbag switch on it, the...
by AlexB
Sun Sep 24, 2017 12:19 pm
Forum: Megane III
Topic: Replacing Front Discs on RS250/265/275 Brembo
Replies: 0
Views: 8811

Replacing Front Discs on RS250/265/275 Brembo

Keywords: Renault Renaultsport Megane III R.S.250 RS250 R.S.265 RS265 R.S.275 RS275 Brembo bolt front brake caliper 160Nm 175Nm It is not difficult, just the torque values are not listed in the regular workshop manual. So, I found it out... Brembo caliper bolts to Perfohub (two long bolts per side):...
by AlexB
Sun Sep 24, 2017 12:00 pm
Forum: Megane III
Topic: Megane III Workshop Manual
Replies: 27
Views: 141702

Re: Megane III Workshop Manual

First post updated, enjoy!
by AlexB
Mon Sep 11, 2017 2:53 pm
Forum: Problems / Questions
Topic: Megane 225. Acceleration problem
Replies: 8
Views: 17194

Re: Megane 225. Acceleration problem

With a fuelling problem there will be abnormal trim values on OBD... You may also look at the boost pressure live readings, also on OBD. One more option is the dephaser stuck in the retarded position. If the case, then it may rattle on startup or may be just stuck. Hi Bob there isn't no fault codes ...
by AlexB
Mon Sep 11, 2017 2:41 pm
Forum: Problems / Questions
Topic: Keycard battery life - 24 hrs
Replies: 10
Views: 31817

Re: Keycard battery life - 24 hrs

It is safe to remove the battery from the card, no programming required after.

q292u wrote:I wouldn't risk removing the battery for any length of time!
I'd be worried that it would lose some crucial (RenaultSpeak for "expensive") setting..

Go to advanced search