Search found 56 matches

by kornnut106
Mon Feb 21, 2011 7:24 am
Forum: Problems / Questions
Topic: Flickering lights and rough running
Replies: 4
Views: 4435

Re: Flickering lights and rough running

lol .. well hope you get it sorted. :driving
by kornnut106
Sat Feb 12, 2011 8:28 am
Forum: Problems / Questions
Topic: Flickering lights and rough running
Replies: 4
Views: 4435

Re: Flickering lights and rough running

my car done the same thing it was the a dodgy alternator it would'nt show up on my mechanics eletrical volt meter (ie the fault) because its such a quick voltage drop ...but youll sure notice it through the lights etc. you need a manual type volt meter to pick it up or have a better scanner with a w...
by kornnut106
Sat Feb 12, 2011 8:13 am
Forum: Problems / Questions
Topic: Cannot connect to EOBD
Replies: 5
Views: 4136

Re: Cannot connect to EOBD

plug the elmscan into the odb2 socket , put the card key in, then just hold the start button till you here everything clicking (coming on) dash etc and it should work no need to start the car. Make sure you goto the settings and to - connect to odb2.
by kornnut106
Thu Nov 25, 2010 7:57 am
Forum: Problems / Questions
Topic: Is this engine mounts?
Replies: 5
Views: 1086

Re: Is this engine mounts?

if you look at your top engine mount (left hand side at the top big rubber thing and part metal probably has a blue paint dot on it) there should be a gap that you can see clearly, this gap would be directly in between the middle of the mount about half a centimetre wide. if this gap is not there th...
by kornnut106
Sat Oct 02, 2010 5:51 am
Forum: Problems / Questions
Topic: drive shaft question urgent help needed i think lol
Replies: 3
Views: 879

Re: drive shaft question urgent help needed i think lol

thanks for the replies, as for the drive shaft i didnt want mine to come out ....(thats how easy it comes out lol) , i was replacing the whole wish bone, however the drive shaft would have just pulled straight out easily mines an 2004 megane 1.5dci,iam not confident on topping up oil but can pretty ...
by kornnut106
Sun Sep 26, 2010 5:02 am
Forum: Problems / Questions
Topic: drive shaft question urgent help needed i think lol
Replies: 3
Views: 879

drive shaft question urgent help needed i think lol

hello today i managed to pull the drive shaft out of the gear box just a bit enough for a small amount about 3 table spoons full of gear box oil , when this happened i quickly pushed the drive shaft back in and the leak seems to have completely stop. My question is - will this matter much ie will i ...
by kornnut106
Fri Sep 10, 2010 3:53 am
Forum: Parts and Accessories
Topic: Just got my Renault CLIP.
Replies: 24
Views: 3422

Re: Just got my Renault CLIP.

the links arent working :sad
by kornnut106
Wed Sep 08, 2010 1:56 am
Forum: Problems / Questions
Topic: help ball joint pinch bolt sizes
Replies: 0
Views: 854

help ball joint pinch bolt sizes

hello and thanks in advance , at the moment iam wanting to change my control arm on both sides however there are 2 types of pinch bolts that are used to keep the lower ball joint in place one being 16mm and the other being 18mm. What i nned to know is which one do i need 16 or the 18mm my car is 1.5...
by kornnut106
Sat Aug 21, 2010 5:17 am
Forum: Pre Ownership Questions
Topic: 1.5 Dci Dynamique ???
Replies: 1
Views: 1091

Re: 1.5 Dci Dynamique ???

doubt this is any use now but anyway here i go 04 1.5 dci (80HP) problems ive had at 49,000 miles-60,000 1 alternator failed common fault lol CHECK PULLY CONDITION AND BELT( IF IT FAILS THE BITS MIGHT GET INTO CRANKSHAFT AREA AND MAKE TIMMING BELT JUMP A TOOTH) EXPENSIVE TO GET REPAIRED £300 2 BATTE...
by kornnut106
Sun May 23, 2010 7:31 am
Forum: Problems / Questions
Topic: oil leak please help
Replies: 22
Views: 13157

Re: oil leak please help

ill maybe have a go at that shortly if any thing id like the engine cleaner anyways lol but good idea.
by kornnut106
Mon May 17, 2010 3:54 am
Forum: Problems / Questions
Topic: if you know please help thanks in advance.
Replies: 14
Views: 1829

Re: if you know please help thanks in advance.

i thought id update ( i forgot lol ) and yes it was the engine mount though three different mechanics couldnt tell me this.. £150 for a new one fitted.
by kornnut106
Mon May 17, 2010 3:47 am
Forum: Problems / Questions
Topic: oil leak please help
Replies: 22
Views: 13157

Re: oil leak please help

yeah i though about getting the no. of the yellow plate but the numbers are impossible to make out which sucks just a bit. My plan is... if i find out that the turbo is at fault id want to rebuild it myself ..no joke... :eek lol but now iam not sure only because id have thought , with the heat of th...
by kornnut106
Sun May 16, 2010 3:40 am
Forum: Problems / Questions
Topic: oil leak please help
Replies: 22
Views: 13157

Re: oil leak please help

do my pictures confuse you or is it the way ive done out the post anyways id be in ballymena.... though not that you dont already probably know ( but just incase ) lol my engine is well different that the one you posted i appericate the help you have given so far thanks by the way
by kornnut106
Sat May 15, 2010 8:30 pm
Forum: Problems / Questions
Topic: brake light not working near side and off side HELP???
Replies: 2
Views: 1000

Re: brake light not working near side and off side HELP???

sorry i cant help but i have a simlar problem my reverse light dosent work and my stop lights keep blowing and it aint a fuse checked the all though may be yours is a fuse .just thought id share.lol :idea
by kornnut106
Sat May 15, 2010 6:35 pm
Forum: Problems / Questions
Topic: oil leak please help
Replies: 22
Views: 13157

Re: oil leak please help

[img]https://img139.imageshack.us/img139[img] you can see the oil on top of the cat converter and around the turdo..lol... outer caseing http://img714.imageshack.us/img714/8684/cimg0871e.jpg turbo is nice and clean on inside but below you can see the inlet pipe that connects to it has oil on it http...

Go to advanced search