The Mégane II Owners' Club

Hi ...i mean the bite point is really low down almost at the floor, problem is i dont own the car yet so was trying to be sure before i spent my money....

Hi just about to buy another megane after our last one was written off 3 weeks ago. We are looking at a 54 plate 1.9 dci same as we had, however the potential new car clutch pedal seems really low to the floor before it bites...my immeadiate thought was clutch is going..am i right?? :? so had quote ...

Hi No i dont have access to tooling i just set tension by pressing on belt on its longest run between crank and tensioner so that i can get between 45 to 90 degrees of movement with moderate pressure with my thumb.Then turned engine over manually a complete revolution then check again and adjust if ...

Well its all back together and running like a dream, but is peaking every now and then raises from 800rpm upto 900rpm and then down again after 30 second s or so but like i say runs fine... can i just mention that coles of cookstown have been blinding with their help and parts cheaper than anywhere ...

Got a reply....

White lines will advance as belt rotates they are used for initial set up, providing timing marks on engine line up and crank pin can be entered then it ok.......................................Hopefully

Ah...i see
Still got sleep in my eyes i think...after reading again initial reply...
I have contacted renault to see what they say if they will say!
Thanks again Alexb for your help,
if i get a reply from renault i will let you know how i get on..but not holding my breath..
cheers
Stu

Hi Alexb Yes tha belt is a genuine renault belt that i purchased, I dont quite follow your explanation as yes the crank is half the size so crank does two revolutions cam one revolution and timing belt one complete revolution and should return to the same position? whereas mine is moving one tooth a...

Hi thanks for that.. The marks are all lined up at initial fitting of belt but like i say after every cycle of the engine(2 turns of crank) they have moved 1 tooth from timing marks??? never noticed this before on other cars that i have done, even other french cars but this just does not seem to sta...

Hi Guys Just half way through changing the timing belt on my car have got the dowel in flywheel and marks all line up as they should, have put belt on and tensioned. The marks on the belt(white lines across width) are all on the timing marks on all pulleys(cam,crank and fuel pump). When i rotate the...

Hi does anyone know if the OE water pumps on the megane have plastic impellors or metal please..? its a 2004 1.9 dci 120bhp dont seem to be getting any flow of water around the engine even though its not over heating and is only showing a 1/4 way up the gauge, no pressure build up or water returning...

Hi guys when i start my car occasionally the trip computer resets itself, totally random did think it was if i left the lights on last time of driving and just stopped car and got out. However this is not right as it did it this morning without lights left on. Its a 1.9 dci megane 04 plate,with card...

Changed my nearside bulb today took 5 minutes, just remove small panel above headlight flat blade screwdriver quarter turn on fixings, then remove panel in inner wing pinch bulb holder and remove . hold up through gap where small panel was removed pull bulb out of holder and replace easy....job........

Dont know if this will help or if you have solved but i had exactly same problem on 1.9 dci and found fuel pipe from filter to pump (clear plastic with concertina on bends) had rubbed through slightly where it sits in the clips, allowing air in, but no diesel out, problem was worse when i parked nos...

ulrich100....check your emails........

Dont know if this will help people but i brought a megane yesterday cheap £1500 for 54 plate 1.9dci as the warning light had come on for the previous owner so he wanted rid as renault had on the diagnostics and found no error codes etc...they told him he needed new injection system and pump posssibl...