Search found 33 matches
- Wed Mar 02, 2011 10:00 am
- Forum: Problems / Questions
- Topic: LAGUNA 3 08-Onwards Reliable ?
- Replies: 0
- Views: 1398
LAGUNA 3 08-Onwards Reliable ?
Anyone no anyone with one are they better thant the MEG 2 DOG AND LAG 2 DOG ??
- Tue Mar 01, 2011 12:35 pm
- Forum: Problems / Questions
- Topic: Engine Mount Dropped..!!
- Replies: 3
- Views: 2497
Re: Engine Mount Dropped..!!
Hi the mounts around £115-£120 any one can do it its an easy DIY job i did mine in 30 mins.
No one sell them after market either QH Did but the withdrew the mount for some reason.
No one sell them after market either QH Did but the withdrew the mount for some reason.
- Fri Dec 17, 2010 12:31 pm
- Forum: Problems / Questions
- Topic: 3 beeps on start up
- Replies: 8
- Views: 9014
- Mon Oct 25, 2010 2:26 pm
- Forum: Problems / Questions
- Topic: Engine vibration 1.9 diesel
- Replies: 3
- Views: 2940
Re: Engine vibration 1.9 diesel
Yer i had this it turned out the engine mount was at fault, on inspection it looked ok but had sank/collapsed when compared to a new mount.
Stick a pry bar and lift the mount slightly the vibration should stop in the cab till u take the pry bar out.
Stick a pry bar and lift the mount slightly the vibration should stop in the cab till u take the pry bar out.
- Tue Oct 05, 2010 10:15 am
- Forum: Problems / Questions
- Topic: 1.9dci with a drinking problem
- Replies: 1
- Views: 1759
Re: 1.9dci with a drinking problem
Hi
Is this round town MPG ? as to be honest the mid 30s is all i get from my 1.9dci 120 round town take her on a run and she hits 55mpg odd.
Is this round town MPG ? as to be honest the mid 30s is all i get from my 1.9dci 120 round town take her on a run and she hits 55mpg odd.
- Mon Oct 04, 2010 3:32 pm
- Forum: Problems / Questions
- Topic: Lower Suspension Arm Pivot bolt Torque ?
- Replies: 2
- Views: 2340
Re: Lower Suspension Arm Pivot bolt Torque ?
Yer is that the Pivot bolt as well as dsent really mention that ?
- Mon Oct 04, 2010 1:21 pm
- Forum: Problems / Questions
- Topic: Lower Suspension Arm Pivot bolt Torque ?
- Replies: 2
- Views: 2340
Lower Suspension Arm Pivot bolt Torque ?
Hi all does anyone no what the torque spec is as NO INFO in th online manuals or Haynes ??
Or is it TFT setting ?
1.9 dci model
Or is it TFT setting ?
1.9 dci model
- Tue Sep 28, 2010 9:51 pm
- Forum: Problems / Questions
- Topic: Knocking from Front
- Replies: 10
- Views: 5111
Re: Knocking from Front
I had this issue mine was loose bolts on the universal joint for the steering rack re-placed and re torqued cured the problem also the ball joints are quite common to fail on renaults
- Mon Sep 27, 2010 12:04 pm
- Forum: Problems / Questions
- Topic: AIR CONDITIONING FAULT - MEGANE 1.9 DCI
- Replies: 9
- Views: 4925
Re: AIR CONDITIONING FAULT - MEGANE 1.9 DCI
Note to all The meganes Fuel injection computer knocks out the compressor when the pressure in the sytem gets below 3 bar to save any compressor damage. This the needs to be reset by renaults clip system once the system has been re gassed also the pressure switch is very unreliable and normally fail...
- Tue May 04, 2010 10:04 am
- Forum: Parts and Accessories
- Topic: Which OBDII Software Works with Elm327
- Replies: 0
- Views: 1470
Which OBDII Software Works with Elm327
Hi all Which OBDII Software Works with Elm327 on the megII 2005/55 1.9dci 120 to read and clear faults from the injection ecu ?
- Wed Apr 28, 2010 1:32 pm
- Forum: Problems / Questions
- Topic: Aircon dosent work
- Replies: 4
- Views: 3141
Re: Aircon dosent work
Well the guy in the post had Climate mines Old Skool Manual A/C also it has never done this before ??
- Tue Apr 27, 2010 7:46 am
- Forum: Problems / Questions
- Topic: Aircon dosent work
- Replies: 4
- Views: 3141
Re: Aircon dosent work
Yer its gassed and lubbed up good i really cant work it out i have checked the manuals no mention of a temp switch i am at a loss big time
- Mon Apr 26, 2010 7:14 pm
- Forum: Problems / Questions
- Topic: Aircon dosent work
- Replies: 4
- Views: 3141
Aircon dosent work
Hi all Aircon dosent work unless engine coolant temprature is at 85 Degrees C anyone got any ideas ? it will not blow cold till the engine is at 85 also the :cry cooling fan is work with out any faults and engages when the call for aircon is requested but the compressor will not engage till the engi...
- Mon Apr 26, 2010 12:47 pm
- Forum: Problems / Questions
- Topic: Elm 327
- Replies: 0
- Views: 1207
Elm 327
Hi does anyone no if the elm 327 can reset a cold loop fault in the ECU well injection computer as some put it ?
as this is where the fault is stored
Does it re set all ECU faults i no it dosent deal with UCH faults.
Regards
as this is where the fault is stored
Does it re set all ECU faults i no it dosent deal with UCH faults.
Regards
- Wed Apr 21, 2010 9:08 pm
- Forum: Problems / Questions
- Topic: Aircon Pressure Switch Feeds
- Replies: 1
- Views: 1744
Aircon Pressure Switch Feeds
Hi does anyone no if it uses a positive or negative feed to swithc the compressor on or of depending on low or high pressure ??