Search found 5 matches

by kooloval
Sun May 27, 2012 11:30 am
Forum: Problems / Questions
Topic: edit..wet engine bay fuse box (FIXED)
Replies: 15
Views: 14273

Re: edit..wet engine bay fuse box (FIXED)

Not sure what you mean by colour, mine got wet, plug in bits look good & clean now but cant see in the board which is a sandwich. i am not totally following this no system on the ech boards, The other post had 8200306033 & fitted 8200306033A on a 1.9dci it worked. Mine is a 8200306033A 1.9dc...
by kooloval
Fri May 25, 2012 10:35 pm
Forum: Problems / Questions
Topic: edit..wet engine bay fuse box (FIXED)
Replies: 15
Views: 14273

Re: edit..wet engine bay fuse box (FIXED)

thats brilliant, ive got the same problem & although everything works its just the engine doesnt turn over! checked the ech fuse board plug in pins & fuses etc but its difficult to know if its ok, suppose a bit of water can cause a small short that you cant see. Any way must look for a board...
by kooloval
Fri May 25, 2012 12:26 pm
Forum: Problems / Questions
Topic: Car Won't Start - 2 Audio Beeps
Replies: 42
Views: 23932

Re: Car Won't Start - wet ech

I have dried my ech out & cleaned all plugs but although when starter pressed things click & work (lights.c.locking,wipers etc) engine doesnt turn over! I had water in the footwells do you think inside ech could have got wet? main ecu all looked dry + they have sealed plug in connectors.
by kooloval
Thu May 24, 2012 12:11 pm
Forum: Problems / Questions
Topic: Car Won't Start - 2 Audio Beeps
Replies: 42
Views: 23932

Re: Car Won't Start - 2 Audio Beeps

i have exactly the same problems & have been thro it as you have, mine was water from the top as skuttle drains had blocked. I had water inside aswell. If i could get to the starter ? whats the easiest route? i was going to jump to the solenoid to see if it starts. Will a s/h board if its the sa...
by kooloval
Wed May 23, 2012 11:14 pm
Forum: Problems / Questions
Topic: Fuse box
Replies: 8
Views: 11024

Re: Fuse box

is it possible to fit a s/h board? Had the usual problem drain holes blocked & water o/flowed onto engine fuse board & inside floor.
Dried it out but everything works lights, wiperscentral locking & relays seem to click when you press starter but engine doesnt turn over. All fuses ok.

Go to advanced search