Search found 107 matches

by nathan black
Tue Sep 06, 2011 4:36 pm
Forum: Problems / Questions
Topic: 1.9 f9q refusing to start
Replies: 3
Views: 2698

Re: 1.9 f9q refusing to start

hi it cnt be the battery as it turns over perfectly fine and i am going to get it scanned at the weekend
by nathan black
Mon Sep 05, 2011 4:28 pm
Forum: Problems / Questions
Topic: 1.9 f9q refusing to start
Replies: 3
Views: 2698

1.9 f9q refusing to start

Hi guys just wondering if anyone has any ideas to why my Megane won't start it turns over fine and you can hear it has loads of compression, I have also had the fuel pressure checked and it's around 300 bar I have also had the injectors checked and they seem fine but the car refuses to start even on...
by nathan black
Mon Jan 24, 2011 6:32 pm
Forum: Problems / Questions
Topic: 1.9 Dci injector seized open
Replies: 2
Views: 2461

Re: 1.9 Dci injector seized open

Hi thanks for the reply my auto elecy has a clip so he can code it in for cheap but I have been rolls it's the bottom mechanical half of the injector which is seized and the top electrical solenoid valve is fine
by nathan black
Mon Jan 24, 2011 4:26 pm
Forum: Problems / Questions
Topic: 1.9 Dci injector seized open
Replies: 2
Views: 2461

1.9 Dci injector seized open

Hi my Megane 1.9dci on a 52 plate has an injector seized open as you take the in Hector pipe of number 3 injector and turn the engine over diesel sprays out of the injector from the compression of the engine I have now finally removed the injector as it was also seized in the head ( nightmare) But I...
by nathan black
Sat Nov 27, 2010 8:54 am
Forum: Problems / Questions
Topic: Seized in head injector 1.9dci any ideas
Replies: 0
Views: 1350

Seized in head injector 1.9dci any ideas

After my car had been stood for a few month as it was not being used (Megane 1.9dci 52 plate privelage) it failed to start when I tried to turn it over. As if it had no diesel in it. I connected it to my diagnostic kit and the fuel tail pressure was only at 2 bar and obviously needs to be at 150. I ...
by nathan black
Sun Jul 25, 2010 8:49 am
Forum: Problems / Questions
Topic: Inner tie track rod
Replies: 2
Views: 3839

Re: Inner tie track rod

hi there is a massive post on it some where with photos and how to do it.
it is listed as axial ball joint replacement but i carnt seem to find it as i am going to do mine at the weekend.
by nathan black
Sat May 22, 2010 7:56 am
Forum: Problems / Questions
Topic: The problems keep coming, help!
Replies: 8
Views: 4971

Re: The problems keep coming, help!

the aux belt wraps around the crankshaft pulley causing the cam belt to fail. ask any renault te
by nathan black
Tue May 18, 2010 9:59 pm
Forum: Problems / Questions
Topic: The problems keep coming, help!
Replies: 8
Views: 4971

Re: The problems keep coming, help!

aux belt: auxilary belt or better known as fan belt or alternator belt.
by nathan black
Tue May 18, 2010 9:58 pm
Forum: Problems / Questions
Topic: fan belt renewal
Replies: 4
Views: 2957

Re: fan belt renewal

when engine do you have.

diesel ones are very easy can be done in 5 minutes.

smaller petrols are very hard, if your not competent i would pay for it to get done.

remember the most common cause of a cam belt failure on a megane 2 is fan belt failure.
by nathan black
Tue May 18, 2010 9:55 pm
Forum: Problems / Questions
Topic: Howling noise
Replies: 21
Views: 9437

Re: Howling noise

do not buy one of them kits specialist machines are needed to balance the shafts when rebuilding them. the gasket is just a silver metal one, depending on how many mounting bolts your cat has (should be 3 but can be 2) depends on how many bolts are in the gasket, you are best to buy a new one from r...
by nathan black
Sat May 15, 2010 9:35 pm
Forum: Problems / Questions
Topic: The problems keep coming, help!
Replies: 8
Views: 4971

Re: The problems keep coming, help!

most common cause of a cam belt failure on a megane is due to the aux belt failing
by nathan black
Thu May 13, 2010 9:08 am
Forum: Problems / Questions
Topic: fault code
Replies: 5
Views: 3480

Re: fault code

try replacing the pressure regulator sensor, i have had one go down on a 1.5 before failing that it could be your pump
by nathan black
Thu May 13, 2010 9:05 am
Forum: Problems / Questions
Topic: ENgine Temperature
Replies: 10
Views: 5527

Re: ENgine Temperature

sounds like a glitch in the map. you need to get the ECU reprogrammed. its not as expensive as you think.
by nathan black
Thu May 13, 2010 9:02 am
Forum: Problems / Questions
Topic: clnuk when accelerating, breaking and turning
Replies: 7
Views: 4098

Re: clnuk when accelerating, breaking and turning

sounds like the drive shaft to me. i have had 2 down in 6 month one on a 1.9 and another on a 1.4, very similar noises to what you have described.
by nathan black
Thu May 13, 2010 8:58 am
Forum: Problems / Questions
Topic: oil leak please help
Replies: 22
Views: 22183

Re: oil leak please help

its not the disk but if you trace that pipe back to the front of the engine you will come to a black bottle roughly 1litre capacity and thats it.

Go to advanced search